Learn More Contact Now

Animated Titles in Final Cut Pro X

| | TrackBacks (0)

This lesson focuses on creating an animated title within Final Cut Pro X..

This online training is the culmination of over 1000 hours of work, along with 10 years of Final Cut Pro training experience. Some of these lessons you may have seen on YouTube, and some of those have been included as ‘bonus’ free lessons for the general public.

This lesson includes a promo code for 50% off!

Or visit the website at:  https://www.udemy.com/final-cut-pro-x-training/

The Final Cut Pro X training course includes the following benefits:

  • No Watermark and Advertising with HD Video Lessons
  • Downloadable Practice Media
  • Special Permission to use real movie footage from the short film Legacy.
  • Support Question / Answer Forum
  • Quizzes for Editing Sections
  • Ongoing Phone Support
  • Video Lessons are geared towards helping you become a Final Cut Pro X Certified Pro.
  • Lifetime Membership - No Monthly auto-bill
  • 30 Day Money Back Guarantee
  • FREE Video Lessons - no payment required

Here's the transcript for the Final Cut Pro X tutorial.

This video is part of my online Final Cut Pro X training course.

If you find this lesson useful, visit GeniusDV.com to register for an online class.

Okay, let's talk about creating titles for a few minutes.

In Final Cut Pro X, the titles are located in the title browser window. 

You can bring forward the title browser window by clicking on the letter T.

Inside the title browser window, you’ll see the titles are divided into categories. 

You can expand the area of the title browser window by clicking this slide arrow to show or hide available categories.

As you can see, there are a lot of templates, but don’t worry, the process of editing a template to the timeline and making changes is the same for all of them.

You can also use the scroll wheel on your mouse instead of using the slide bar to scroll up and down through the list.

What's really cool about these template’s, is that if you park over a template and move your mouse left or right, you can see what the template actually looks like before editing it to the timeline.

Now, it's important to note that each of these title templates have different durations. 

I believe this template is four seconds long, so when I drag it to the timeline, this particular template will always default to four seconds in length.

Of course, using this method this edit your title to the timeline may require that you trim your title a bit based on how long you'd like the title to be on the screen.

Alright, I’m going to delete this title to show you another method.

For me, I prefer to use the range tool by pressing the R key to select an area within the primary storyline.  

Then double click on the title to connect it above the range selection. 

Okay, so now if I press the spacebar to play, you can see the title in action.

Since this is a title template, all I need to do is give my new title a name.

Go ahead and select the title and look for the inspector window.

If the inspector window isn't showing, use the keyboard shortcut command 4 to bring it forward.

Then move over to the text tab and give your title template a name.

Okay, so here's how it plays out.

What's awesome about Final Cut Pro X, is this title is now connected with the clip below it, so if I ever need to move my clip, the title with move with it.

One important thing to keep in mind, is that all of these title templates are Motion projects. 

When I talk about Motion, I'm referring to Motion 5 that can be purchased separately from the App store.  

I recommend that you purchase Motion so that if you need to you can edit any of these templates.

That's done by right clicking on a template, and choosing Open a copy in Motion.

Okay, now you can see the title template in Motion where you can make changes and save it as a new template.

With all that being said, you don’t necessarily need Motion 5 to create some cool looking titles.

Let’s go back to Final Cut Pro X and create a custom title and make some changes to it.

To start, use the range tool by pressing the R key to select an area in the primary storyline for where you would like your title to go.

Then move over to the title browser window and double click on the custom title.

Bam, there it is.

Okay, if I go back to the timeline and click on my custom title to select it, you'll notice I now have some parameters that I can change in the inspector window.

Let's start by looking at the choices available within the text tab.

First, you'll notice I can adjust the size of the text. 

Or you can park over the actual size value and hold down your mouse button while you drag up or down.

You can also click the value to highlight it so you can type in your own value.

Okay hopefully, some of these parameters make sense to you, including the ability to adjust the alignment, tracking, and so on.

Click on the style attributes menu at the top of the inspector. 

Here you can choose from a variety of prebuilt styles. 

You can even make changes to one of these styles and save it as a new style.

One thing that's a real blessing, if you pull down the font menu, you can see what all the fonts look like while you make a decision.

Notice how the title in the viewer actually updates as I drag across different font selections.

Then I’ll go ahead and give my title a name.

If you scroll down through the options in the inspector window, you'll also see choices for an outline, glow and drop shadow.

In my example, let's choose an outline.

Click where it says show to reveal the parameters for the outline.

Go ahead and adjust the width. 

Notice the default color is red until you choose a new color.

For an added effect you can also adjust the blur of the width.

Now, I don't want my title in the center of the screen. 

But before moving it, let's not forget about the title safe area. 

That option is located in the upper right corner of the viewer and there's a pull down menu here to show the title safe zones.

To move the title click on the transform effect button in the lower left corner of the viewer window.

Now you can position the title towards to the bottom.

So if I back up and play my timeline you can see the title.

Let's add some animation to the title to make things more interesting.

Then click on the title tab within the inspector window.

So check this out, you've got an opacity slider here. 

However, it does something different than what you might expect.

Go ahead and adjust the opacity to 0 and play through your timeline.

You'll notice the characters fade in one at a time, which is pretty cool.

If you combine this will some scaling it really starts to produce a nice effect.

Now, if I adjust the spread, you'll notice the letters fly in slightly more uniform.

And oh, by the way, you've also got controls for how the title ends such as adjusting your opacity control for the out.

So there you go, with minimal effort you've got a great looking title.

It's that easy! 

Check it out.

And don’t forget, GeniusDV also offers classroom and flat rate onsite Final Cut Pro X training

track.backs

Listed below are 0 links to blogs that reference this entry: Animated Titles in Final Cut Pro X.

TrackBack URL for this entry: http://www.geniusdv.com/weblog/mt-tb.cgi/1953

Receive FREE Tutorials by email:

  • Enrollment Cost: $95.00
  • 84 Lectures
  • Includes Practice Media
  • Interactive Quizzes
  • Official Certificate of Completion
  • One Time Fee - 30 Day Money Back Guarantee
  • Promo code GDVAVID 10% off!
  • Enrollment Cost: $39.00
  • 60 Lectures
  • Includes Practice Media
  • Interactive Quizzes
  • Official Certificate of Completion
  • One Time Fee - 30 Day Money Back Guarantee
  • Promo code GDVFCP 10% off!

about.this

Avid Media Composer Overwrite Trim was the previous entry in this blog.

Avid Media Composer Rolling Trim is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.