Avid Flamethrower Errors for MOJO

Do you have MOJO baby? Well you might receive the fatal Flamethrower error. What is a Flamethrower doing inside your MOJO? Well this is an error that might drive you nuts if you do not know what is going on. The first thing you want to check is if your MOJO has a reference signal, the host light should be on. 2. Uninstall the flamethrower.sys driver (in Windows Device Manager, Avid Technology under Sound Video and Game Controllers, right click, properties, driver. Uninstall and reboot, allowing the driver to reload via the hardware wizard during the boot up process. 3. Quality firewire cables make a difference! Make sure your cables do not exceed 14.76 feet. In fact buy the shortest cables you can, some of my cables are only 1 foot long. 3. Mojo/DNA firmware MUST match the software release. If you turned off the Mojo/DNA improperly during an upgrade it might not get a proper firmware upgrade. Try reinstalling the software following the proper sequence per install guide. More than likely these will help cure any future errors with your MOJO! Don’t leave home without your MOJO!